Some cappuccino art from yesterday.

Tall Rosetta. A little off balance, but with a big heart.

More proportional and symmetrical. Pretty happy with this one.

Another angle to show froth volume.

New Item on the Cart

Brand new, though borrowed.

This is so I can get some practice in for the SCRBC. No, I don't have a LM to use, but I'm doing what I can. Practice coffee on the way. Watch out, South Central competitors... I've got your number.

Just some art

6oz. cappuccino. Tulip shaped cup. Milk texture could've been better, but I was pretty happy with the rosetta... especially considering the cup shape. (flat bottom, small diameter rim, etc..)
The serving tray I'll be using for the SCRBC. The three flower pics are actually slots for 4x6 photos. Those slots will be put to good use.

Look! Look! The standard for transparency is farther still

Guess whose blog I snagged this little gem from?

Origins listed in percentiles as contents of the blend. Amazing. I can't wait to see this sort of thing here in the States. It's bound to happen eventually. Right? ...Bueller?

Next step: visible lot numbers along with everything else... and then Agtron numbers. Roast profiles are a bit much. Roast level is almost too much to ask. Is it possible?

Rocket Reserve Espresso blend

Larry was kind enough to send me a pound of his newest espresso blend.

Rocket Reserve:

When it arrived, it had not even been publicly released. This stuff retails for a whopping $21/lb. If you knew the list of coffees in it, you would understand why. One of these coffees is exclusively available from Rocket Coffee Roasters.

Here's a look at the roast color and consistency:



It was recommended to start this experimentation at roughly 16 grams and 201F for a double.

So I did just that. 16 grams, but the temp was a little on the high side.
The resulting shot:


The flavor was of leather, cigar tobacco leaf, and a winey tinge. The flavors are not "clean", per se, but they are very clear, very refined, and very easy to identify. The culmination is much like what a possible men's cologne could smell like.

With a heavier dose, I've noticed that the leather becomes dominant, and the winey tinge is a little sharp. Not unpleasantly so, but it's something I noticed.

At a lower temperature, the leather and tobacco take center stage, and the acidity is dulled a little. Strange, I realize, but that's what my tastes told me. At a higher temperature, it becomes a little unpleasant. The flavors lack balance, and the sophistication gives way to an exaggeration of the darker flavor characteristics, and not much else.

I've discovered that with this blend, it's actually best to pull it a little longer than normal. Don't cut it at the first sign of blonding, or you'll be missing some of the clarity.

I found my preferred brew paramters to be closer to 14 grams, a fine grind to pull in ~26-28 seconds, with a lighter tamp (say, 25lbs.. according to the elbow-gauge). The tobacco flavor becomes enhanced with a particular sweetness. The leather is tamed to the status of a compliment rather than a contending flavor. The wineyness is balanced by the sweetness and tobacco flavors quite nicely. The resulting shot was smoother with a much rounder flavor profile and medium body. The temperature was about 201, if I remember correctly, so don't change that part.

As an Americano, the extraction parameter effects become more apparent. I'm not entirely sure why that is.
Often times, I'll find that an Americano can actually expose otherwise hidden flavors in a complex blend. The flavors in this particular case are exactly the same. This is credence to the earlier description that the flavors are clear and distinct.
For a killer Americano, nail the shot with the specs mentioned.

In milk, the leather and tobacco come right through, but so does a dark fruit flavor. This fruit isn't berry.. it's more like plum, but even less tart, if that makes sense. The flavor is present in the straight espresso, but not so much. I believe this is due to the milk dulling the acidity that is a critical part of the winey tinge mentioned earlier.

The flavor is strong enough to cut through even a 16oz. latte, if that's what you like, but I found I liked it best as an Americano for reasons mentioned earlier. It works beautifully in a cappuccino, and makes a very pleasant straight espresso. The lingering aftertaste is sweet, more tobacco than leather, with some of the dried plum coming through. Take a drink of water after the espresso to heighten this effect.

Overall, this doesn't replace my favorite, even at the price-point, but that's just a subjective thing. There is no guessing what you're tasting with this one. The flavors are clear, the mouthfeel is consistent from beginning to end, and the aftertaste isn't far from the initial flavor. Once you've had it, there are no more surprises. It's a consistent flavor, and for that reason, I would consider it to be a very forgiving blend, with little sacrifice to the elegance of the coffee itself in the cup.

Definitely worth a try once it becomes available. Look for it in the coming week or two.

Sold the Gaggia

My first machine capable of real espresso has been sold. Thankfully, it was sold locally. Thankfully still, the guy who bought it has become an instant coffee buddy, so I'll get to see my old machine once in awhile.

I have a potential training session on the horizon. I've been "promised" the gig, but there's no set date, so I will not say it's for certain.

I had the chance to see and use the newer Astoria stylish machine.

I thought it looked very cool. It seems to be fairly messy with no backsplash. Rinsing the PF takes more care than usual. It also seemed to run a little hot, even with the HX boiler at under 1 bar. It also felt a little different with all of the controls down below rather than closer to eye level. Very cool looking in person, though. I can't stress that enough.

I've been playing with some more Rocket Coffee, but that's for another post. Competition is coming closer, and I'm feeling unprepared. The rules aren't even up yet. :eekomg!:

I don't have a single La Marzocco locally to even try to get with for practice. I'm just doing what I can with what I have with the words "Grab ahold of something, bite your lip, and give it hell" running through my mind. Strange, yet somehow fitting.

I am officially quitting my job at Papa John's. I've realized that if I were to follow through on interest I've received for training or consulting projects, I would have enough work to not need a "wages" job. On top of that, I'd have the time to get out and sell the services in person, which is always better. "Even fishing takes effort"

And here's a teaser for the review(s) to come within the next few days.

Life is funny

Have you ever been in a situation where you just had too much going on to remember the things you did to maintain your sanity?

It's been like that here in "the life of Jason" lately, so pardon the lack of updates.

A few things have happened. I've been devoting a lot of time to the Texas Coffee People site, including buying the domain name TX-Coffee.com which, by the way, is fully functional as the primary URL for the site. So if you still haven't, drop by and check it out. It's still young, and my fellow contributors seem to be having a difficult time with regular contributions. It's been a one-man show lately.

I took a trip to Austin and visited a few shops... and instead of blogging about it here, it went straight to tx-coffee.com.

I am still planning to compete in the SCRBC in June, and have been trying to promote the hell out of it in any way I can. See Tx-Coffee.com, and see the News tab at http://espressotrainer.com.

Since I have not worked behind a bar in quite some time, figuring out a way to practice has been quite a challenge. I have to buy all of my own coffee. I have to buy all of my own milk. To make matters worse, I am working on a Heat Exchanger home machine. As of now, my odds of making it half way are not too good.

On an up note, I did purchase a kitchen island cart for espresso use, so I at least have a normal height to work with to at least be somewhere in the vicinity of the feel of a competition setting. I like it quite a bit, and it keeps my coffee supplies neatly organized, and right at my fingertips... sans the roaster and green coffee.


My Gaggia Coffee is now for sale. If you are interested in a good starter home espresso machine and have $100 + shipping to spare, you can find some pictures here.

It's by miracle that this blog still has any traffic at all, and it's mostly to read my how-to guide for making the Gaggia MDF stepless. Thanks to a CoffeeSnob(.au) in Australia who did a complete renovation on his MDF to make it far more than it was ever intended to be, who read my how-to, and linked it for the world to see. He later left a link to a PDF of a finer adjustment ring for the number collar for steps. It works beautifully. How many MDF's do you know of that look like this?

While I was transferring everything to my new "shrine", I found my Senseo that was taken apart into a million pieces. I decided to put it back together, and if nothing else, sell it or give it away since good coffee from it was an impossibility and it just wasn't worth my trouble.

I decided to give it another go, seeing that I had it back together and all, and I did. This time, with a slight alteration in technique. When the water reaches temperature, press the brew button, and when you hear the pump start to push some water through, turn the unit off, and then right back on. Once you see it reach temp again, press the brew button and let it go.

MUCH improved. No pre-heating the water before putting it in the reservoir. No pump modifications. It's not ideal, but it's definitely drinkable. I still recommend that you either buy an after market ground coffee adapter, or make your own pods, but please, for the love of good coffee, do NOT buy pre-ground packaged pods for your Senseo.

I also bought a new tamper. "What?", you say. "Jason? A second tamper?". Why yes, actually, why not? By the way, this one is flat. "You're kidding me!.. You? The advocate of the Convex tamper? But why!?" Yes, I know. A million apologies, but I can explain. I like variety. And when I saw this little beauty on e-bay, from a Texas seller, I figured I could spend the green for a new piece of equipment... if for no other reason than for some in-home serious experimentation.
...And experiment I did.

I found the "donut extraction" problem to be much more common from the flat tamper, I suspect, due to the natural tendency for the density of the center of the puck to be slightly higher than at the edges, as well as the tendency for the seal between the puck and the sidewalls of the portafilter to be slightly looser than the packed matrix of coffee granules at the center. A convex tamper has a tendency to not only decrease the distance between the top of the center of the puck and the floor of the filterbasket, but also to put some outward pressure on the coffee particles, thus, helping to fortify the integrity of the side seal.

I did find, however, that scooping a bit from the center of the puck by means of a curved finger during the final leveling off of the puck, the donut extraction is greatly reduced. In fact, I'd call it a non-factor. People have said that the WDT helps to solve the problem.. and it may... but I don't have time for that. I guess I do, but I still consider myself a professional, since I train professionals, and I feel an obligation to keep my skills and technique honed to the application of a commercial setting, even if I do not work behind the bar on a regular basis (or at all, really).

"Is it fast?" Absolutely. Especially when teamed with the Stockfleth's move. "Isn't dosing a factor?" Well, that's not really up to the leveling technique, now is it? If you're a good barista, you'll know how to compensate for any loss of coffee mass in the puck from such a technique.

"Doesn't it waste coffee?" Such a small amount, but isn't it worth it for exceptional espresso?

...I thought so too.

I have much more to write about, but I don't want to clutter up a single post with too much information, so you can look forward to another update in the near future.

Aaaaah... it's good to be back.

Progressing The Third Wave... ?

I'm sure there will be people who will read this and think, "Oh God, this has been beaten to death... give it a rest!".

In this case, it's about the title description of this particular blog, and my own questioning of whether it's appropriate.

Let's recap.

1st wave: People are drinking coffee. It's the norm, and life in these United States has never been the same since.

2nd wave: People are introduced to the phenomenon known as "Specialty Coffee". Essentially, the notion that coffee has a gourmet side. Starbucks flourishes, and the Italian word for milk becomes common terminology in regards to coffee in the average household.

3rd wave: Quality is king. People are taking this "gourmet coffee" thing seriously. Microlot artisan roasters begin popping up, the SCAA, the BGA, the Roasters Guild and everyone involved become key figures for the "new" niche industry in which the art and science of quality coffee begins. Among these trends is the triple basket, the naked portafilter, microfoam, latte art, and the infamous ristretto.

Here's the dilemma. The 3rd wave was described by the industry as the time in which we "let the coffee speak for itself.". What I see is something else. I see taking a coffee, and forming it to fit the concept of what quality coffee, at the time, is accepted to be.

I notice a new wave of progress within this "3rd wave" niche community. Updosing is the new old-school. Light roasting is making its way back to just in front of the curve. Last but not least, the growers are in the game, playing ball with the rest of us. Many would argue that this is all part of the 3rd wave.. sure. For a few, but it wasn't in the volume or growth of what I would personally call a "wave".

Tiny farms are being rewarded for their hard work through the efforts of coffee auctions such as the Cup of Excellence, and others are taking notice. The concept of "Quality as the primary means of success" has trickled down to the earliest stages of the chain.

And beyond that, single origin espresso is no longer exotic. It's almost the norm for great baristas everywhere. Light roasts enhance the work of the grower, and allow the coffee to really showcase what it is, before the flavors of the flame over-ride the dizzying array of non-coffee flavors present in the green. Green coffee flaws, while still present, are MUCH easier to avoid for people like me. You just have to know where to look, and there is an increasing number of options popping up.

There is the formation of a group within this niche of people advocating quality, and more importantly, absolute honesty in the cup. While those really pushing this practice forward have been called "young guns", its practice is most accurately defined by one of the oldest guns in the North American Specialty Coffee Industry.

There is also the formation of a group of home espresso enthusiasts with a strong tendency to make everything technical and scientifically complex, to the point of, in my opinion, diluting the artistry and basic skill involved and associated with the craft.

The only problem I see, is that the 3rd wave has not finished its initial progression, and yet, here is a 4th wave forming in its crest.

Here in Lubbock-land, the 3rd wave is almost non-present.. and you can just forget about the idea of a 4th wave.

While I think that my part of the country could use a healthy helping of 3rd wave mentality, I'm not sure I should imply that I am helping to progress the third wave, especially since I have a tendency to side with the "young guns" in the search for green quality and absolute honesty in the cup, and constantly progressing towards what appears to be a wine-model approach to coffee in the green state... even the notion of "vintage" coffees.. the same idea, but far from the same practice.

There has not been a stopping of motion between the 2nd and 3rd waves. It seems to me that it was one big motion, just a change of direction, or a vector shift.

At what point does the 3rd wave end, and the 4th wave "begin"? Here's a thought.. when did the second wave end... Now, when did the 3rd wave begin?

It's just not that simple.

Case in point, is it time for a change of the title description? According to a "State of the Industry" report (thanks to Henry Patterson for sending me the link) , we(you know.. the "young guns") are a pretty good ways in front of the curve.

Not that the report is indicative of where the quality niche actually lies, but it's a reference to where the nation as a whole places itself at this moment in time. Apparently, Lubbock is a good 10+years behind.

WCR's Decaf Torro espresso blend

You may remember my review of the Torro espresso blend from West Coast Roasting a good while back.

Nate White decided it was time to put the decaf up on the site, and asked if I'd like to give it a review. How could I refuse?

The bag aroma is interesting. Chocolate, yes, but also something else.. something much akin to licorice (black, naturally). It was good, but very different.

The first try was a normale double used in a 10oz. latte. It tasted of chocolate, but it was also bitter with a drying effect on the surface of the tongue just behind the tip. Interesting.

Now, I know this is a Decaf blend, so it will be lacking in flavor and complexity when compared to a non-altered bean, but I didn't want to have a shot that was just good "for a decaf". I was determined to get a good shot by any standard, if at all possible.

The obvious solution? Updose, of course.

All this on an Expobar Pulser with a stepless Gaggia MDF. So I dosed a bit more coffee into the ridgless "Synesso" double basket, and pulled. Slightly better, but not enough to say so.

A little logic tells me that the coffee is lacking much of its natural chemistry from the decaffeination process. In order to eke out the maximum flavor, we must have more flavor to begin with from which to extract. The solution?

Jon Rosenthal's infamous Triple Ristretto. Now, usually, I despise this drink. It's as dishonest as one can possibly get to the bean's natural flavor... at least, to me. But I was desperate, and in this case, it seemed to make sense.

Load up the triple basket with no overdosing. Pull the shot to about 1.5oz in about 22 seconds. The coffee sang. It was sweet, it was viscous, and it tasted VERY much of cherries. The result was a chocolate covered cherry with a very weak chocolate. It was definitely not what I was expecting when compared to the normal Torro I had tried.

There is still more experimenting to come, so stay tuned.

UPDATE.

Alright, so I've had some time to live with this coffee. Despite my first impression, this coffee has proven to be a great end-of-the-day treat. I must confess, however, that this is reliant on the triple basket. I was never able to get a shot to satisfy myself with a double basket.

Seeing that I own a tripls basket and a naked PF, this isn't an issue at all, but it could be for some, but I digress. It would be worth trying even if you don't have a triple. For a decaf, it's really pretty dang tasty.

In milk, it mellows out quite a bit and settles into a nice coffee and chocolate flavor. Dark chocolate and milk, that is, not milk chocolate.

I have enjoyed it most as a 2oz. triple Americano with a normal dose pulled in ~22-24 seconds time. I have found it to be quite sweet this way, with teh berry flavors shining through, but not overpowering the mellow balance of the medium bodied medley of flavors.

If you are in need of a go-to decaf blend for espresso, don't pass this one up on your search.

West Coast Roasting website

The Expobar is "Go! Go! Go!" (Roger That)

Finding Teflon tubing isn't as easy as one might think.

I found a company called Zeus (www.zeusinc.com) who actually specializes in different types of tubing for different industries, including medical, so I figured I'd have no trouble with the food-safe factor.

I sent out an email with the information of what I needed, and if it were possible to only buy 2' (way more than I needed, but extra is good... just in case).

The response I received asked for the measurements of the tubing. I replied, and received a response telling me that they were sending some samples.

"Cool", I thought. Their site describes that Teflon isn't always comprised of PTFE, and that there are actually OTHER non-stick formulas that were developed for the same use in different applications. Little did I know.

Moving on.

I received a box about a week later. Inside the box was a plastic bag containing a length of tubing arranged in a coil. The label said 5'. No charge. Amazing.

That evening, I got it all together. It has been operable ever since. Eureka!

Jason now has a heat exchanger equipped with the thermal stability of the E61 grouphead. It is now possible to crank out the espressos at will, and froth while I brew. This makes preparation a whole lot faster, which means that when I suggest to my beautiful girlfriend that we head over to my place for coffee, she is more likely to agree. Fussing with two drinks on the Gaggia isn't much fun, though it is quite capable of producing some great espresso.

I had actually gotten ahold of Bill at espressowrench.com (www.espressowrench.com) in Tucson to see if they could get ahold of some Teflon tubing for me. It came back positive... just after I was informed of being sent "samples". I didn't think the sample would be enough to work with, so I said, "great! let me know how much."

So here's the dilemma. Do I pay for the tubing and shipping, or do I just pay for the tubing to make up for their cost? I have more than enough tubing to last me for at least 5 years on this thing.

Some of you might be wondering, "What's the E61 group head all about? Why is it special?" Well, it was introduced by Faema in 1961 for optimal thermal stability while producing espresso, which was apparently a big problem at the time. So, yeah.. it's used in espresso preparation.. introduced in 61, and called E61. Coincidence? Perhaps.

Anyway, this is what you see.

(the back side)

And here is a thread on Home-Barista.com with illustrations of how it works.
E61 Diagrams thread

It should be noted that the Pulser is only equipped with the head.. not the entire brew group. (no lever.. there is a solenoid and a switch.. that is all)

BTW.. the espresso rocks, but I'm sick of flushing 10 ounces of water beforehand.

Expobar Update

So, I know I said I would have pictures.

And I do, but I didn't want to post them just yet.

The Pulser has a leak. A pretty severe leak. A length of John Guest tubing kept bursting under pressure, so I'm waiting for some replacement tubing before I try to reassemble it.

It should be here sometime this week... I hope.

The espresso was good, but I'm having a hard time with the frothing on this thing.

Replacement tip, here I come!

Massive Update

I'm back. Actually, I've been back, but haven't spent the time to update.

The Barista Jam in Tucson, AZ was an absolute blast. Everyone there was so passionate about what they do. So many people asking questions from anyone they can to learn whatever they can in order to advance their craft. It was extremely refreshing.

I shared a hotel room with Larry Jones and Edwin Martinez, which was pretty interesting. In the room we had: A Rocky doserless, a Chemex, a French Press, about 8 or so different coffees, and three coffee nerds.



Edwin and I woke up every morning to the words "There's a Chemex going over there for ya". What a way to start the day.



I met a whole lot of people. I really doubt I'd even begin to be able to remember all of their names. I met the crew from Cabin Coffee, and they seemed to be the most eager passionate group there. At least, that was my perspective.

Reid Hickman was there to give a presentation on Latte Art, which was extremely well received. It was quite the popular event. Rightfully so, considering the fact that he's won the Millrock Latte Art contest... twice.

I met Gene Lemos of Vanelli's and talked to him quite a bit. It was interesting to be proverbially slapped around a bit by someone who's been in the industry for longer than I've been alive. I learned alot. He was there to give a presentation on home espresso machines which were demoed during the Home Barista shin-dig following the end of Day 1 of the Jam.

Edwin gave his Seed-to-cup presentation, which was a bit more refined and interactive than what I remember in San Antonio. It was also streamlined quite a bit to fit the time frame that was partly taken up when Edwin had everyone introduce themselves. A good idea for sure.

Bill Brodberg gave a presentation on espresso machine maintenance for the working barista. As far as The Coffee Vein is concerned, he is the ONLY espresso equipment technician in Tucson. He had some examples of what can happen if you don't use softened water, if you don't clean out your portafilters, and other little gems that should never grace the counter of a good shop. I was amazed by some of it. You hear alot about it, but how often do you see a 1/4" cake of "black" crack and knock out of a portafilter than had never been cleaned? Yeah... seriously. Gross stuff.

Larry and Gene were scheduled to give a presentation entitled "Advanced Espresso Techniques". Seeing that training is what I do, I figured I would offer to help them outline it. They almost suckered me into doing the whole thing on my own. I could have, but I didn't feel right about it. I was there as a part of the audience, in theory, and I really would not have felt right about taking it on entirely. So, they decided that I should cover distribution techniques. Of course, once I started talking, I had a hard time shutting up, but oh well. I think it went over pretty well. There were some good questions, and a lot of people walking up to me afterwards with various questions.

Mike Trevino did one hell of a job organizing this thing and keeping it on track. It never would have gone as smoothly as it did without him.

Chris(aka Psyd) was there in the background doing all of the grunt-work to make this thing carry through without a hitch. Changing out 5gallon water bottles, washing milk pitchers, setting up, tearing down, cleaning up, and so on. I asked him about it in a light-hearted manner, and he told me his purpose for doing all of that was to make sure that The Vein maintained a great reputation so that it would always be there so he could get a shot when he didn't feel like pulling one on his 2-group Astoria in his small kitchen. (I saw pictures.. it's nuts) The Vein has at least one seriously dedicated customer. I always wished for customers who I could talk coffee with. It's a rare thing.

There was a latte art contest and a signature drink contest. I didn't enter either. I was having way too much fun talking to people about coffee.


That just about wraps up the AZ Barista jam.

I was supposed to go to Tyler, TX to train a shop, but that was called off at the last minute. Joy!

I guess it's okay, though, because it gave me some time to figure out my schooling for this upcoming semester. (going back at it.. need to finish)

I also launched, but have not yet gone public with, www.espressotrainer.com . It is still under construction, but I think it's starting to come together... slowly.

I've gotten positive feedback from people about Texas Coffee People.(http://txcp.wordpress.com). Everyone seems to want to help pull the Texas coffee community together. It's a beautiful thing, and I hope I can help make it happen.

Last, but certainly not least, the Expobar Pulser arrived equipped with a PID and Manometer. Woohoo! HX > 2.5oz. single boiler. It had a leak when it arrived, which I believe to now be fixed. I need to replace the water level safety switch, but I think I can bypass it in the mean time.

Pictures to come.

The New Project

I am proud to announce the beginning of what could be a huge change for the community of coffee fans and enthusiasts in Texas, much like what arizona-coffee.com has done for the coffee community in Arizona.

It's called Texas Coffee People, named for Aaron Blanco's title for those who are genuinely passionate about coffee, and the Lone Star State.

Take a look.
TXCP

The AZ Barista Jam

I leave for Phoenix, AZ tomorrow afternoon. Larry is going to get me from the airport, and we'll put around Phoenix for part of the day, at least. I'm not sure if we're driving down to Tucson that night, or the next morning.

It's exciting for me. I'll get to put a face to all these people I've been in contact with for quite some time now thanks to Arizona Coffee.

I know Mike "call me Trevino" Trevino has been putting a lot of work into organizing this thing, which is taking place at The Coffee Vein.

Here is an abbreviated schedule of events - (times subject to change - but unlikely)

Sunday 1/7

10am- "Making the perfect Mocha"

11am- "From seed to cup" presentation; by Edwin Martinez, Finca Vista Hermosa, Guatemala

12:00- Lunch Break (free time)

1pm- Pacific Foods "Latte Art Contest"

2:30pm- Latte Art Technique

3:30pm- "Importance of water quality" presentation - David Beeman, Cirqua Water Systems

5pm- Advanced Espresso Extraction

6pm - 9pm- Home Barista Espresso Fest, sponsored by Vaneli's

Monday 1/8

10am- "Espresso Machine Maintenance" - Bill Brodberg, Espresso Wrench

11am- "Comparative Cupping" - Larry Jones, Rocket Coffee Roasters

12:00- Lunch Break (free time)

1pm- Artista Signature Drink Competition

2:30pm- Advanced Brewing Methods- Edwin Martinez

3:30pm- "What's on your drink menu?" Alternative drink options- Red Rock Foods

4:30pm "Open Jam" time on espresso machines


So, there you have it. I'm hoping to get a lot of pictures from this one. I may or may not enter the sig drink contest. I don't feel I'm prepared. I just haven't had time to play with my ideas yet, but hopefully, soon.

The Art of the Bean

I just discovered this film on HB.

I never knew it existed. (or maybe I did, but just don't remember)




Enjoy.

Merry Christmas / Happy New Year

It's been a busy season for me. Fun, but busy.


I know that the tiny blurb in the current issue of Barista Magazine has already been read by now, but...

I think it's high time for an update on my take of the first annual TX Barista Jam.

I was surprised by how many people showed up. Where are all these TX coffee people hiding? Most of them aren't active online, it seems. It's difficult to know your community when you don't have any contact with the people within it.

It was pretty nifty to see a Clover in person. LOTS of different coffees were run through the Clover. Not one of them were dialed in. I think the merits of the Clover would have been better displayed had the time been taken (or notes been followed) to properly adjust the brew parameters for each individual coffee. This may have happened later on in the Jam, as I left during the Lunch break to spend time with my girlfriend, and to see San Antonio. (we walked the entire riverwalk, including the entire riverwalk mall.. just for kicks. We saw the Alamo, and took a boat ride.. it was a lot of fun).

It was good to finally meet Mike McKim in person. I didn't have much time to talk with him, but things happen, I suppose.

The crew from Medici seemed to kind of stick together. None seemed to talk too much. I hope they had fun. I had a hard time telling. Maybe none of them talked to ME, but they talked to others. Who knows.

Edwin Martinez gave a fascinating presentation on the growing and processing of coffee. I learned a heck of a lot, but it was hard to hear. Luckily for me, he's going to give the same presentation in Tucson at the AZ Barista Jam. It'll be good to see him again. He's definitley "coffee people". (in the words of Aaron Blanco)

I have to give a lot of credit to Aaron for putting all of this together in such a short amount of time. Aaron is most definitely "coffee people". If you want to just talk coffee, these are the kind of people you want to get with.

I say that, because for a meeting of coffee people, I had a really hard time finding opportunities to talk about coffee with people. It seemed like there was a lot of focus on the demo equipment itself, and not so much on the coffee being run through it. Fair enough, I suppose, considering it was the first time a Clover had ever been seen in the Lone Star State. It was also the first time I had a La Marzocco GB/5 at my disposal, courtesy of Mike. I didn't spend a lot of time on it, but I think maybe I should have messed with it a bit more. I didn't think I would get much from it while using a blend I was unfamiliar with. It makes it hard to reference differences compared to machines I HAVE had experience with.

An interesting fact about this jam is that it was hosted by Ruta Maya Riverwalk Coffee House. Yeah.. not interesting yet. The interesting part is that they were open for business throughout the entire jam, and continuing on long after it was over.

This is where it got interesting. My workshop was to take place behind the bar of the shop, on their equipment, while they were open. That's right... I was teaching milk frothing to a group of people while on a live bar. It was a bit awkward, I have to say. I felt like I really didn't know my audience, which made it really difficult to put something together. Not everyone was at the same level, and I think the most enthusiastic people at the jam were the on-duty baristi at Ruta Maya. I havent' seen that kind of enthusiasm in someone else at any other shop, ever. It was quite refreshing to see, coming from a place where no-one seems to care at all.

To the mentioned baristi: if you guys are reading this, you guys rock. the heart outweighs the skill any day of the week. Skills can be developed, but the passion is inherent. Keep it up.

In any case, I can't say I was effective at instructing for latte art. The cups available to me for use were 6.5oz. Nuova Point cappuccino cups. This doesn't sound so bad, right? Except, that I had never used the type of cup before. The shape is drastically different than anything else I had ever used. Strange as it may seem. My first 5 or so practice attempts were beautiful. During the workshop, however, I had the hardest time focusing while trying to leave room for people to watch, and explain what is going on while doing it. It was a little ridiculous, and definitely a new experience for me. Something I'll have to work on for the SCRBC.

Some of the Medici folks came in with the ability to already create microfoam, and some were able to pour art. I really felt bad, and unprepared, because I didn't have a lot to offer them while including those who did not already have the training to do either. I really didn't feel too good about my performance. I felt like I disappointed some people who had paid to come to the event. I can, however, say that I am pretty certain that every single person left the workshop with the ability to create beautiful microfoam. The shop's Futurmat's steam wands made microfoam nearly effortless. Seriously, it was the easiest time I have ever had in creating velvety microfoam with minimal effort.

Mike gave his workshop on espresso while I was doing the milk workshop, so I never really got to see what he has to say on general espresso theory. I would have liked to see that one. I didn't hear a whole lot about it either, so I don't have anything to report there, really. He IS our regional BGA chapter rep, so I'd imagine him to have presented a pretty solid workshop.

Aaron hosted a comparitive cupping session focused on flavor differences between varying (3) degrees of roast. It was pretty interesting to taste them side by side. I already knew that there was a huge difference, but that was the first time I had ever cupped the same coffee at different levels in the same session like that. The difference is more extreme than I gave credit for.

At the end of the day, I had fears of losing some items I had left available for use while I was gone. (synesso filterbaskets, microfibers, my tamper), but I got it all back, safe and sound. I can't say enough about this industry. I have yet to meet a single dishonest serious coffee person. I have not met a single one who I would not trust almost immediately to do the right thing at any given moment in time. Every time I attend a coffee get-together, I always feel right at home, even if everyone is a complete stranger. It's a beautiful thing.

I found it a bit interesting when David (of Clover equipment) asked what sort of rag I lent him. Apparently, the world of car detailing has something to give to the world of the Clover. The miracle known as Microfiber.

________________________________________________

Up next is the AZ Barista Jam. Almost immediately afterwards, it looks like I'll be traveling to Tyler, TX to help train a new shop opened in a hospital.

Coming soon: an upgrade to an HX machine... 'bout time.
Soon afterwards: an upgrade to a better grinder.. hopefully a MACAP M4 Stepless. (fingers crossed)

El Salvadore CoE #4 Santa Sofia

From Rocket Coffee Roasters.

Drip - this is one well-balanced coffee with lots of flavor. Black Currant, a hint of milk chocolate, just a little cashew, and what I would describe as "green cavendish banana".. as in, under-ripe.

There is a bit of juiciness just before it goes down.

I have not yet cupped this coffee, but so far, it is very good.

more to come.

Texas Barista Jam, Nov. 11

San Antonio, TX.

Be there, or be square.



Texas Barista Jam 2006
Schedule of Events
Time Event
7–8a Registration, networking, coffee and pastries

8a Introductions and Announcements

8:30a Group Cupping: “How Roast Affects Flavor”

9a Ideas Exchange: “Sustainability in Coffee”
Angel Mena, Ruta Maya Riverwalk Coffeehouse, San
Antonio, TX

9:45a Equipment Demo: Clover 1S
David Latourell, Coffee Equipment Co., Seattle, Wa

10-10:30a/10:35-11a
Skills Workshop: “Espresso 101 and 201"
Mike McKim, Cuvee Coffee Roasting Co., Spring, TX

10-10:30a/10:35-11a
Skills Workshop: “Milk Stuff 101 and 201”
Jason Haeger, Mangia Bevanda Coffeehouse, Lubbock, TX

11a Coffee Break

11:15a Ideas Exchange: “Seed to Cup: The Story of Finca
Vista Hermosa”
Edwin Martinez, Finca Vista Hermosa, Huehuetenango,
Guatemala

12p Lunch On Your Own

1p Free Time On Machines

1:30p Group Cupping: “Geography As Flavor”

2-2:30p/2:35-3p
Skills Workshop: “How To Brew Anything”
Aaron Blanco, The Brown Coffee Co., San Antonio, TX

2-2:30p/2:35-3p
Skills Workshop: “Fixing What Goes Wrong”
Mike McKim, Cuvee Coffee Roasting Co., Spring, TX

3:05p Espresso Break

3:05p Free Time ON Machines

4:45p Wrap Up; Door Prizes; Clean Up

5p Good-Byes


Registration/check-in: $25 at door–cash, check, visa, mastercard. (Coffee provided by the brown coffee company. Pastries
provided by cappuccino paradise.)
Introductions/announcements: Aaron Blanco. Sponsor thank you’s; layout agenda; each participant introduce themselves
Cupping #1: ‘How Roast Affects Flavor’ Aaron Blanco facilitates. Two coffees (six total) cupped side by side at city, full city,
viennese roast to see how roasting changes a coffee’s cup characteristics. (Coffees on Clover provided by The Brown Coffee Co.)
Ideas Exchange #1: ‘Sustainability in Coffee’ Angel Mena. Key points on social and environmental agendas that help coffee
growers such as organics, fair trade, shade grown, etc. 35 min’s with 10 min’s Q & A.
Equipment Demo: Clover 1S David Latourell. 15 (or so) minutes on the Clover, its attributes and parameters for brewing coffee.
(Coffees on Clover provided by The Brown Coffee Co., Counter Culture Coffee Co., Cuvee Coffee Roasting Co., Ruta Maya)
Note: All Workshops will be run twice at approximately 30 min’s each with 5+ min’s for Q & A. Participants will be split into two groups with each group participating in one or the other session first, then switching to the other workshop.

Kenya coffee and fruit

+

=

So, I've been a bit delinquent in keeping this thing updated

A few things to report.

I have been informed today that I have acquired yet ANOTHER nickname.

"The coffee Don".. apparently I should take on a Brooklyn accent and wear a large tacky ring. Maybe I should keep a collection of these. "Waterboy of coffee" "The coffee Don"

I wonder what's next.

In other news, I've had the great pleasure of tasting a few different coffees lately. A HUGE thank-you goes out to Jaime Van Schyndel for setting me up with all of this, and another HUGE thank-you to Andrew at Ecco, and to the folks at Terroir for setting me up with an extra bag of coffee that was not in the initial order.

I want to comment on a couple of these coffees.

First, I had the pleasure of sampling (a full pound and a half!) of Ecco Reserve.


My first impressions were that I had to be missing something. It's a very light coffee, in that it doesn't hit you hard like most espressos I've tried do. The body isn't the kicker in this one. What really stood out to me is how delicate and sophisticated this espresso really is. The flavors are subtle, and the mouthfeel is extremely soft, and very delicate. Even with these characteristics, the espresso comes through in milk (6oz. capp) The chocolate is very subtle, but definitely present. There is a slight nuttiness (almond, I'd say), with a caramel sweetness hidden beneath.

The mouthfeel is extremely smooth.. and extremely "light". I know this is the wrong descriptor category, but it "goes down easy". The aftertaste as just as balanced and delicate as the initial flavor. This was a bit unexpected, but it really attests to the quality of this coffee. Most definitely worth trying at least once.

The second coffee I want to talk about is Terroir's Ethiopia Yirgacheffe Addis Ketema. I know Jaime has posted about this over at Barismo.com, and I know Chris Owens has given a brief opinion at ShotZombies.blogspot and I guess now it's my turn.

Cupped, this coffee tasted remarkably similar to Darjeeling tea, with just a touch of unsweetened lemon, and a subtley sweet aftertaste.

This coffee is intended to be enjoyed as a Single Origin Espresso, and considering as such, I did exactly that.

After talking to Jaime for a couple of minutes on the phone, he suggested I try it at a very small (volumetrically) dose.. but a very normal weight. This is some DENSE coffee. 16 grams left some extremely generous head-space. I could not use my index finger to distribute the grounds, as they only came up maybe 2/3-3/4 in the filterbasket BEFORE tamping. Jaime suggested I start with a 16 gram dose to pull ~1.25 oz. in about 28 seconds. I tried this, and I found that I liked it.. quite a bit. The flavors were intense, the sweetness was heightened, and the tea was.. diminished? Something wasn't right. The dominant flavor characteristic in the cupping was that of black Darjeeling tea. Why were my espresso experiences so drastically different? I tried again.. temperature surfing higher, lower, but still.. while the unique individual flavors were heightened, the basic element was drastically diminished.

Change of plan. I tried dosing by volume, as I normally do, just to full, and leveled, with no volumetric updosing. I temp-surfed for temperature stability, but not an increase or decrease in the standard temperature for my Gaggia(yes, I know.. I REALLY need an upgrade on my home setup). This shot.. my God. This was heaven in a demitasse. The tea was back.. in full force, but smoother, stronger, sweeter, and the lemon flavor was exactly as balanced as during the cupping, with the body and mouthfeel being much MUCH smoother than I would have anticipated for such a bright coffee and an aftertaste that highlights the sweetness of the tea flavor.. LONG after it's gone. A sip of water about a minute after consuming, and the sweetness in the back of the throat is quite obvious. Beautiful.

Try it again, but this time temp surf a little higher. The flavors are heightened, especially the sweetness.. but again, the tea is diminished. The individual flavors absolutley POP, but the identity (as I knew it from cupping) seemed to be hidden, or rather, too quiet to be tasted through all of the shouting.

With so many different ways to enjoy this as an espresso, and with so many different flavors of great intensity, and pleasure, this is one I'll have to try again.. and possibly again after that.

This is absolutely the best single origin espresso I have ever tried. Period. The flavor is so clean, I can actually taste the "quality" Jaime talks so much about. There is a HUGE difference between this, and a lesser quality coffee. By lesser, I don't mean commercial grade.. I mean specialty grade, high-end coffees. If you've never understood the idea of an absolute definition of quality, try this coffee. It will all become clear.

Moving on, the shop has begun using my coffee. Pretty cool, I guess. I can't help but feel like it's not that huge of a deal, but still... I guess I should be proud.

I plug it to customers whenever I can. I know that it's the freshest offering we have, and usually, it's the better of the two coffees available. I prefer to highlight origin characteristics, while our coffee supplier seems to usually highlight the roast a bit more than I would prefer. Everything tastes like chocolate, it seems. Not that there's anything wrong with that, but to my mind, that's not the pinnacle of what coffee can be. That's also not to say that the origin characteristics are hidden by the roast.. this is not the case. It's just a factor I personally don't care to draw attention to at all. It's about the coffee, not the roast.

Move further along, I'm really REALLY excited about the Barista Jam coming up in January.

To be held at The Coffee Vein in Tucson, AZ. I'll be attending with Larry Jones under the Rocket Coffee Roasters name. Larry's giving me a ride down, and a place to stay while I'm in AZ. What's so exciting about this jam is that I'll be able to meet a lot of people in person who I've had lots of contact with online. Mike "call me Trevino" Trevino, Chris Tingom of Arizona-Coffee.com, Steve Kessler (a new face in the online coffee world, and more specifically, the AZ coffee world), and last but not least, Larry Jones. (sorry if I left you out.. Psyd)

There is to be a Latte art contest, and a signature drink contest. I'm going to be in the Latte art contest for sure.. the signature drink contest I'm not so sure about. Unless I can figure something out soon, I doubt I'll enter. In any case, GB/5's, Mazzers, a 2group Synesso, and a Lorenzato(sp) (Rancilio, from what I hear) to play on, as well as multiple other various brew methods. Let's not forget the coffee.. Rocket Coffee all around. Very exciting.

I'll try to update this thing more often.